|
|
 |
|
|
 |
SMT 303 Series Irons
NEW!! These SMT 303 Series irons obtained heavy design input from 3-time Ryder Cup Player Chip Beck. The beauty is that these irons from SMT can be combined for the ultimate in customization and flexibility. Mix and match the 303cb1, 303cb2 & 303mb to create the set of irons that best suits your needs. Because all the specs line up across the three models, there's no need to make adjustments for variations - just pick the models you need and you are all set!
The 303cb1's are a full cavity back with the most forgiveness with the mid to high handicapper in mind. The 303cb2's are half cavity back for the middle to low handicap player. The 303mb is a full muscleback blade with a no nonsense design that is sure to attract the "player" in all of us.
Cast in soft 303 stainless steel, and then uniquely heat treated with a satin finish, the 303 series irons are completely bendable and have the feel of a quality forged iron. Faces are CNC machined to be absolutely flat, and the score lines are milled- typical of the quality you expect from SMT.
Additional SMT Durometer wedges available in 51, 53, 55, 57 and 59 degrees. Click on "Wedges" to view. |
|
| Clubhead | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | Tol. |
| Loft | 21 | 24 | 27 | 31 | 35 | 39 | 44 | 49 | |
| Lie | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 64 | |
| Weight | 242 | 249 | 256 | 263 | 270 | 277 | 284 | 291 | |
| Offset | 4.8 | 4.6 | 4.1 | 3.6 | 3.3 | 2.7 | 2.3 | 1.4 | |
|
| --Available in right hand only |
| | Steel Shaft:call or e-mail for price...depends on shaft/grip. | Graphite Shaft: call or e-mail..depends on shaft/grip choice. |
|
| Click here to go back |
|
|
Irons | Woods | Wedges | Putters
Home | FAQ | About | Contact
|
|
|
|
|
YouTube: Search Tom Wishon
|
|
|
|
ASK Yourself: 1)Are all golfers the same size? 2)Are all golfers the same strength? 3)Do all golfers have the same athletic ability? 4)Do all golfers have the same swing speed and tempo? If you have ever observed golfers on a driving range, you know the answer is NO! So how can preassembled clubs with standard one-size-fits-all specifications (length,loft,lie,offset,total weight,swing weight/MOI,wood face angle,shaft flex,shaft weight,shaft bend profile,grip size,etc) allow you to play your best golf? There is no comparison to a set built one club at a time with your swingspeed, tempo, athletic ability, coordination, body size, and comfort level taken into consideration. BEFORE you get misled by a $50 million per year marketing campaign, allow me to give you a free, 15 minute, no obligation, clubfitting demonstration before you decide where to buy...at the very least you will learn a few things. ALSO MOI matching and TLT (True Length Technology). MOI matching allows every club to perform like your favorite. Have your existing irons MOI matched allowing for more center-face impact which will increase accuracy and distance. TLT allows the golfer to set up correctly in a repeatable athletic address position. This will improve the swing path resulting in better ball striking. Repeatability is so important, and if the swing is repeatable, this will show up in their results. The TLT athletic address is also the healthiest address position promoting longevity, and with less physical breakdowns due to the reduced stress on the body....see my FAQ's for more info. NO BETTER prices on regripping in town...save $3 or more per grip. ALL shafts are SPINE ALIGNED and FREQUENCY MATCHED to exact flex values to FIT YOUR SWING...No big-name golf club company that you see on TV offers this shaft service to the general public-WHY??-because it would take too much time (and expense) and this would slow down their MASS PRODUCTION ASSEMBLY LINE!!
|
|
|
|
|
|
Irons
Woods
Wedges
Putters
Main Page